Simrad EQ44 Manual Manual page 52

Chapter 10-2
Echosounder setup:
Select transducers:
Transducer 1:
Transducer 2:
Keel depth below surface:
Display:
Data on NMEA-out from:
Alarm for fish:
Depth DS fish:
Depth DK alarm min.:
Depth DK alarm max.:
Water profile:
Velocity of sound in water:
Time/distance scale:
Restart of AUTO pulse/power:
Echo sampling:
Demo mode:
MENU
Use the cursor key to move cursor around in the display
Select new values by means of the +/- keys
+/-
Confirm changes, or...
ENT
Abandon changes and exit display
MENU
Transducer - select transducer type. Insert the depth (position) of
the transducer below surface.
Display can show: DEPTH BELOW KEEL / SURFACE / TRANS-
DUCER.
Data on NMEA-out from - select the frequency you wish to use for
transfer of data to connected navigator, plotter, etc.
Alarm for fish - set the strength from min. 000 (weak echo) to max.
099% (strong echo), and you can set it ON or OFF.
Exit
EQ44/54 SETUP menu
TYPE
NONE
NONE
BEAM ANGLE
DEPTH BELOW KEEL
Strength: 065%
min: 0005 m
PORT
ECHO1
ECHO2
DEPTH
00.0 m
NONE
OFF
max: 0030 m
0005.0 m OFF
0030.0 m OFF
SALT
1470m/s
ON
20 sec.
BOTTOM
OFF
ENT
Accept