Honda GX160 Operational Manual page 29

Oil-bath type
1. take off the butterfly nuts and the air cleaner cover, and remove and separate the filter element,
check the 2 filter element carefully. If there is hole or tearing, please replace it.
2. Foam filter-element: use soap with warm water to clean, rinse and dry the foam filter-element.
Or using non-flammable solvent to clean and dry the foam filter-element.
3. Make the filter-element Soaked the clean fuel, then squeezing out the extra fuel. If there have
extra fuel in the foam filter-element box, it will case the gasoline engine smoke during first
start.
4. Discharge out the fuel of air cleaner. Using non-flammable or high-lit solvent to clean the dust.
Then dry the air clean box.
5. inject the same oil lubricate of the gasoline engine to the air cleaner box, the level position of
the oil (please see page 22)
6. re-load back the filter element and cover.
28