Move Out; Transportation - Honda GX160 Operational Manual

Install the gasoline engine in level, because the tilt will lead the fuel or oil leakage.
After the gasoline engine and fuel system cooling, cover the gasoline engine to avoid the dust. The
hot gasoline engine or exhaust system may burn or melt some materials, don't use plastic film.
The gas-tight cover will make the engine gasoline engine moisture, and acceleration the rusty or
corrosion.

Move out

According to the operation manual, before operation, please check the gasoline engine.
If the fuel discharge out before storage, then inject the fresh oil to the fuel tank. If you inject the
fuel from a container, please make sure the fuel is fresh, the bad fuel will make the gasoline
engine hard to start.
If you smear a layer of oil on the gasoline engine, once you start the gasoline engine, it will
produce some flog, it is normal.

Transportation

If the gasoline engine has been running, please let it cool at least 15 minutes, and match the other
equipment, the hot gasoline engine and exhaust system may scald you or burning other material.
In transportation, please put the gasoline engine in level to avoid fuel leakage, and put the fuel
valve to Off.