Using Tone Services With A Pulse Line; Using Mute; Using Reset - Radio Shack Chronomatic-300 User Manual

some telephone companies), you can put your current call on hold and answer
another call by pressing FLASH.
two calls.
NOTE: If you do not have any special telephone services, pressing FLASH
might disconnect you current call.

USING TONE SERVICES WITH A PULSE LINE

Some special services, such as alternate long-distance and bank-by-phone,
require tone signals.
If you have pulse service, you can still use special tone services by
following these steps:
1. Set TONE/PULSE to PULSE.
2. Call the special service using pulse dialing.
3. When the special service answers, press TONE OR *.
4. Follow the normal procedures for the special service you are using.
Any additional numbers dialed are sent as touch-tone signals.
5. When you finish the call, hang up the phone.
NOTE: Some special services use the * and # buttons in the tone mode.
has no function in the pulse mode.

USING MUTE

This feature lets you mute your conversation while using the phone.
can listen to the caller on the line, but that person cannot hear you.
This is useful if you want to talk privately with someone in the room.
To mute the phone conversation, press and hold MUTE.
To return to the phone conversation, release MUTE again.

USING RESET

When you are using the telephone and want to hang up from that call, press
RESET for approximately 2 seconds.
without first returning the handset to the cradle.
Press FLASH again to alternate between the
Then you can make your next call
#
You