Table of Contents
Advertisement
WAP-3101 Ceiling Mount PoE Wireless AP
Authentication Type: Select an authentication method. Options available are Open
Key, Shared Key or Auto
to authenticate as long as it conforms to any MAC address filter policies that may
have been set. All authentication packets are transmitted without encryption. Shared
Key sends an unencrypted challenge text string to any device attempting to
communicate with the Access Point. The device requesting authentication encrypts
the challenge text and sends it back to the Access Point. If the challenge text is
encrypted correctly, the Access Point allows the requesting device to authenticate. It
is recommended to select Auto if you are not sure which authentication type is used.
Input Type: Select He or ASCII from the drop-down list
Key Length: Select a key format from the drop-down list. 64bit-hex keys require 10
characters, where as 128-bit keys require 26 characters. 128bit keys require 32
characters. A hex key is defined as a number between 0 through 9 and letter
between A through F.
Default Key: You may use up to four different keys for four different networks. Select
the current key that will be used.
Key 1-4: You may enter four different WEP keys.
Click on the Apply button to save the changes.
(Auto：AP mode only)
. An open system allows any client
18
Advertisement
Table of Contents
