Table of Contents
Advertisement
WAP-3101 Ceiling Mount PoE Wireless AP
Web Configuration
Logging In
To configure the device through the web-browser, enter the IP address of the Bridge
(default: 192.168.1.1) into the address bar of the web-browser and press Enter.
Make sure that the Bridge and your computers are on the same subnet. Refer to
Chapter 2 in order to configure the IP address of your computer.
Username：admin; Password：admin
After logging in you will see the graphical user
interface (GUI) of the device. The navigation
drop-down menu on left is divided into four main
sections:
1.
Status: This includes the main status page,
DHCP client list, and system log.
2.
System: This includes the system properties
and IP settings.
Wireless: This includes the basic, advanced,
3.
security, WDS, and MAC filter for the wireless
interface.
Management
4.
: This includes the administrator
password settings, VLAN and SNMP settings,
backup/restore configuration, firmware upgrade,
time settings, and the system log.
The status page is also displayed once you have
logged in. This includes details about the system,
wireless, and TCP/IP configuration.
11
Advertisement
Table of Contents
