Setting Camera Delay; Setting Image Resolution - Ranger BN058 Instructions For Use Manual

6.2.4 S d
et
Minimum delay is the time in minutes and seconds for
which the camera will pause after a trigger event.
1. Press the UP or DOWN button until "SET DELAY"
is displayed
2. Press OK to confirm.
3. Press UP or DOWN to select minutes and
seconds and press OK to accept each value.
4. Press SETUP to exit the settings menu, or press
UP or DOWN for other menu options.
6.2.5 S p
et
5.0MP, 3.0MP and 1.3MP selectable. Lower resolution
means less space is used on the SD card to store
each image, but results in higher pixelated images.
1. Press the UP or DOWN button until "IMG SIZE" is
displayed
2. Press OK to confirm.
3. Press UP or DOWN to select 5.0MP, 3.0MP or
1.3MP and press OK to accept.
4. Press SETUP to exit the settings menu, or press
UP or DOWN for other menu options.
elay
r
hoto eSolutIon
- 13 -