6.3.2 S
Ir f
et
Default is on.
The IR flash will activate automatically when the
environmental light drops below a certain level. IR
illuminated photos and videos are black & white.
You can use this option to turn off the IR flash and
conserve battery power. All pictures taken without the
flash are colour, but photos taken in darkness without
the flash will not result in a usable image.
1.
Refer to 6.1 to enter "AdvanSet".
2.
Press the UP or DOWN button until "IR FLASH" is
displayed
3.
Press OK to confirm.
4.
Press UP or DOWN to select ON or OFF and
press OK to accept.
5.
Press SETUP to exit the settings menu, or press
UP or DOWN for other menu options.
o
laSh
n and
- 16 -
o
ff