Setting Up Your Camera; Setup Mode - Ranger BN058 Instructions For Use Manual

6. S u y c
ettIng p our aMera
6.1 S M
etup ode
Turn on the camera, "Power On" will show for two
seconds:
Then the remaining space on the SD card will display
for two seconds:
Finally, the number of images/videos stored on the
SD card:
Two seconds after this the camera will enter Sleep
Mode to save power. Press the SETUP button to
activate Setup Mode. The display will change to:
NOTE: Pressing the OK key at each of the above
screens will take you directly into Setup Mode.
- 9 -