My Ic Social Networks; Detailed Description - Alcatel-Lucent OmniPCX Office RCE Small Installation Manual

remove CoCPUs).
3. Use LOLA to save customer data from the current main CPU (select option Migration
mono CPU)
4. Unplug the CPU and the unsupported boards from the system.
5. Change the existing hardware for R8.x hardware
6. If the PowerCPU board is equipped with a hard disk, check the presence of a power supply
module PSXS-N (reference: 3EH73072ACxx).
7. Plug the PowerCPU.
8. Use LOLA to install the R8.x.
9. Use LOLA to restore the previously saved customer data.
10. Use OMC to restore the previously saved and modified configuration data.
Configuration
After the hardware upgrade and migration, use the OMC configuration procedures to configure
the Alcatel-Lucent OmniPCX Office Communication Server .
4.15

My IC Social Networks

4.15.1

Detailed description

4.15.1.1 Introduction
My IC Social Networks is an Outlook Add-In user application which runs on the user's
Windows based PC and integrates Microsoft Outlook, Windows Live Messenger (MSN),
Yahoo!, Facebook and Skype with Alcatel-Lucent OmniPCX Office Call Management and
Control. It enables the user to optimize communications by providing consolidated presence
information and by presenting a variety of communication options such as voice, E-mail, SMS
and Instant Messaging (IM).
My IC Social Networks offers direct one-touch interaction between a user's telephony, E-mail,
calendar and IM, bringing together the most popular forms of communications. My IC Social
Networks improves user productivity and simplifies communications.
This document details the prerequisites and installation process of the My IC Social Networks
application.
4.15.1.2 Network Topologies
My IC Social Networks uses the Microsoft TAPI interface to connect to the OmniPCX Office
PCX through which the basic telephony services are supported. My IC Social Networks can
operate in 2 different network modes:
- TAPI 2.0 Client
- TAPI 2.1 Server
The mode selection is made during the installation of My IC Social Networks software on the
end user's PC.
1. TAPI 2.0: Client mode
If there are 25 or fewer computers that will be accessing the OmniPCX Office, then My IC
4-119