Generic Sip Phones - Alcatel-Lucent OmniPCX Office RCE Small Installation Manual

Set unregistered
SIP registration OK
Entering the SIP password through local MMI
For static and dynamic initialization, enter the SIP password through MMI.
4.4.3.1.3 Upgrading the software
The 4135 IP Conference Phone set software is automatically upgraded during OmniPCX
Office software upgrade (there is no specific option to select in the OMC-Software Download
window: refer to
The 4135 IP Conference Phone set software can also be upgraded manually through the MMI.
4.4.4

Generic SIP Phones

4.4.4.1 Commissioning
4.4.4.1.1 Overview
This module presents all the actions required for commissioning generic SIP sets.
The List of supported SIP Phones is available on the Alcatel-Lucent Applications Partner
Program (AAPP) web site.
4.4.4.1.2 Commissioning Generic SIP Sets
This section describes how to commission a generic SIP Set.
The following operations must be performed:
1. Configure the user in OMC, refer to
2. Connect the set, refer to
3. Configure the generic SIP set, refer to
OmniPCX Office DHCP server, refer to
Prerequisites
- The Alcatel-Lucent OmniPCX Office Communication Server must be R810 or higher and
must be operational
- A free IP address must be available for the set
- A port with PoE must be available on a switch
Configuring the User in OMC
To create a generic SIP set:
1. In OMC, go to Users/Base stations List.
2. Select a No., IP access and click on the Add button.
System Startup from OMC - Downloading the Software
Connecting the Set
SIP phone unregistered from Alcatel-Lucent
OmniPCX Office Communication Server
SIP phone connected and successfully re-
gistered to Alcatel-Lucent OmniPCX Office
Communication Server
Configuring the User in OMC
and switch it on
Configuring the generic SIP set
Configuring OmniPCX Office DHCP server
)
, or configure the
.
4-55