Connecting Mobile Phones, Gps And Mp3 Players; Mobile Phone; Connecting Mobile Phones, Gps/Mp3 Players - SCHUBERTH SRC-System User Manual

6. CONNECTING MOBILE PHONES, GPS AND
MP3 PLAYERS
MULTIPLE DEVICE CONNECTIVITY ("MDC") WITH BLUETOOTH® COMPATIBLE
DEVICES
Thanks to MDC technology the SRC-System™ offers parallel connectivity as
follows*:
➤ Intercom with up to two other SRC-System™ headsets
➤ Bluetooth enabled Mobile Phone / GPS device
➤ A2DP enabled MP3 Player
MP3 player
Up to 700 m / 2,300 ft.
Bike-to-Bike
Intercom Range*
Built-in
FM radio
NOTE: If you plan to use your mobile phone while using a Bluetooth® GPS device, then
you should pair your mobile phone to the GPS and not to the SRC-System™ headset.
* see restrictions under 8.4 b
GPS

Mobile phone

& A2DP connectivity
6.1 MOBILE PHONE
To use your Bluetooth® mobile phone with the SRC-System™, you must
first pair the two devices.
NOTE: If you plan to use a GPS device in parallel with your mobile phone, then you
should pair your mobile phone to the GPS device and not to the SRC-System™. In
such case, skip this section and proceed directly with section 6.2.
Pairing is a one time process. Once the headset is paired to a specific mobile
phone, they will remain paired and automatically recognize each other whenever
they are within range.
If the connection between the phone and headset is lost, tap the Mobile Button
on your headset to reconnect the devices.
PAIRING A MOBILE PHONE:
1. Turn on your phone and make sure its Bluetooth® function is activated. Turn on
your headset by pressing the Mobile Phone Button for at least three seconds
resulting in three blue flashes.
2. With the SRC-System™ turned ON, press and hold the Mobile Button for at
least six seconds until the Red and Blue Lights begin rapidly alternating.
3. Search for Bluetooth® devices on your phone by following the phone's instruc-
tions. Consult your phone's User Manual for more information.
4. After a few seconds the phone will list "SRCS" (incl. its software version)
as a discovered device. Select it and follow your phone's instructions to accept
the pairing.
5. When prompted, enter 0000 (four zeros) as your PIN or passkey.
6. Your phone will confirm that pairing has succeeded and the headset will begin
flashing slowly in Blue.
29