Built-In Fm Radio - SCHUBERTH SRC-System User Manual

Any other audio connection will automatically mute the MP3 Player. The audio
signal will return only when headset is once again in Standby mode.
NOTE: While listening to your MP3 player, the VOX feature is disabled
7. BUILT-IN FM RADIO
The SRC-System™ is equipped with an FM stereo radio receiver and RDS (Radio
Data System) technology.
Radio On / Off Press and hold the CHANNEL "B" button for 3 seconds
Switch to next While listening to the Radio, tap the CHANNEL "B" button
preset station
to cycle through the 6 Preset FM Stations
Start Intercom call While listening to the Radio, start talking loudly
Initiate Voice Dial While listening to the Radio, tap the Mobile Button and
from your Mobile
pronounce loudly the name of the person you wish to
Phone call. This feature is supported only by mobile phones that
include the Voice Dial feature
Initiate Redial from
While listening to the Radio, tap the Mobile Button twice
your Mobile Phone
RDS ON/OFF While the Radio is on, press and hold Volume Up and
(Default: OFF) Volume Down Buttons simultaneously for 3 seconds
Thanks to the RDS feature, your headset will automatically select the strongest
signal available for the FM station you wish to listen to, no matter where you are
riding.
32
RDS ON/OFF (press simultaneously 3 seconds while Radio is on)
Channel "A"
Button
• FM Radio ON / OFF (press 3 sec.)
• Switch among pre-saved stations (tap briefly)
There are two ways to search for a new radio station on your SRC-System™:
SEEK AND SAVE:
Seek and Save: (Find the next FM station)
1. P ress and hold the Volume Up or Volume Down Button for 3 seconds.
• P ressing Volume Up searches upwards (higher frequency) for a station
• P ressing Volume Down searches downwards (lower frequency) for a
station
2. T ap the Channel "B" button within 20 seconds of finding the FM station
to save it as the current Preset.
Scan and Save: Scan through FM stations
1. P ress and hold the Volume Up button for 6 seconds. The SRC-System™
will search upwards (higher frequency) for a station. When a station is
found, it can be heard for a few seconds.
2. T o stop the scan on this station: Tap the Volume Up Button.
3. T ap the Channel "B" button within 20 seconds of finding the FM station
to save it as the current Preset.
4. T o continue scan: Wait for the next station to be found.
Channel "B"
Button