Connecting The Pc - Gigaset DE700 IP PRO Quick Start Manual

Gigaset DE700 IP PRO – Gigaset DE900 IP PRO Quick Start Guide
Warning
If you connect your Gigaset DE700 IP PRO/Gigaset DE900 IP PRO to a PoE-capable Ether-
net switch (PoE class IEEE802.3af ), it will be supplied with power via PoE (Power over Eth-
ernet). The PoE network must not exceed the premises boundaries.

Connecting the PC

You need an additional Ethernet cable to connect a PC.
§§1§§
Connect an Ethernet cable to the left-hand LAN port on the
rear of the phone.
§§2§§
Connect the other end of
the Ethernet cable to a LAN
port on the PC.
Connecting a device to the mains power supply (if required)
Attaching the appropriate plug-in module to the power supply unit
§§1§§
Slide the required plug-in module (Europe, Great Britain or
USA) into the recess on the underside of the power supply
unit until it clicks into place.
§§2§§
To remove the plug-in module again,
press on the button marked Push and
pull the plug-in module out of the power
supply unit.
Connecting to the mains power supply
§§3§§
Connect the power adapter to the port on the rear of the phone.
§§4§§
Then insert the plug into the
mains socket.
Warning
Use only the power adapter supplied.
4
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
1
2
3
2
1
4