For Macintosh - Oki C310dn Maintenance Manual

Oki Data CONFIDENTIAL

For Macintosh

In Macintosh, if options are added before installation of the printer driver, device information
can be automatically obtained. If options are added after installation of the printer driver,
make setting of options according to the following steps.
Network connection
For USB connection
❶
Drag the printer icon to the trash on the desktop and empty the trash.
❷
Using the Desktop Printer Utility, create a desktop printer again. When a desktop
printer is created again, the settings are updated.
Memo For how to create a desktop printer, see "Creating the Desktop Printer" of "Setup
for Macintosh with USB Connection" in the user's manual (Setup).
For Mac OS X
In Mac OS X, if options are added before installation of the printer driver, device information
can be automatically obtained, but when connected via IP Print or Bonjour (Rendezvous),
device information cannot be obtained automatically.
Also, when connected via AppleTalk, device information cannot be obtained automatically if
options are added after installation of the printer driver.
In the above cases, you need to set up options according to the following steps.
44346001TH Rev.1
❶
Select the printer in [Chooser] and click
[Reconfigure].
❷
Click [Configuration].
❸
Select an appropriate value in [Number
of Trays] and click [OK].
❹
Close [Chooser].
❶
Double-click [Application] - [Utilities] -
[Printer Setup Utility] in the hard disk.
❷
Select [C530], click [Show Info] and
open [Printer Info].
❸
Select [Installable Options].
❹
Select an appropriate value in [Number
of Trays] and click [Apply Changes].
❺
Close [Printer Info].
(2) Installation of an additional memory
A memory expansion board increases the memory capacity of the printer. A memory
expansion board should be added to the printer when an error message [Memory Overflow]
appears due to insufficient memory for complex data on the printer, or the error message
[Collating Error] appears in making collated sets of copies.
Additional memory
Model name
None (standard)
MEM256G
MEM512D
Note! • Proper operation by use of an unspecified product cannot be guaranteed.
Be sure to use Oki product.
• Additional memory of 256 MB or more is recommended for long-sheet
printing.
• One memory slot is provided.
1. Turn off the printer and disconnect the power cord.
Turn off the printer by following the steps described under "Turning off the power" in
section 3.5.2.
Note! • The printer or additional memory may fail if the power is switched off
without taking shutdown steps. Be sure to execute the shutdown menu.
• Installation of an additional memory with power on may cause a failure of
the printer.
3. INSTALLATION
Memory capacity (total)
256 MB (256 MB)
+256 MB (512 MB)
+512 MB (768 MB)
45 /