Adjusting Engine Idling Speed; Throttle Free Play Adjustment; Adjusting Brake Levers; Checking Pads And Discs Of Front/Rear Brakes (Condition And Wear) - RIEJU CITY LINE 125 User Manual

5.10 ADJUSTING ENGINE IDLING SPEED

• For possible adjustments, please contact an Authorised
RIEJU Service Centre.

5.11 THROTTLE FREE PLAY ADJUSTMENT

• Check that the throttle grip idle stroke is 1-3 mm (measured
on the end of the throttle grip). Any adjustments must be en-
trusted to an Authorised RIEJU Service Centre.

5.12 ADJUSTING BRAKE LEVERS

• Maintenance of the brake levers is limited to the brake fluid
level check (see chap. 5.5).
• A soft feeling in the brake levers could indicate the presence of
air in the hydraulic circuit. In this event, refer to an Authorised
RIEJU Service Centre for a check and circuit purging, if
necessary.
english
5.13 CHECKING PADS AND DISCS OF FRONT/REAR
BRAKES (condition and wear)
• We recommend that you have the front/rear pads and discs
checked by an Authorised RIEJUService Centre every 2,000 km
(1,240 mi).
• The minimum thickness of the brake lining shall not be less
than 2 mm (Fig. 36). Check the thickness of the brake pads as
indicated by references A/B (Fig. 36).
• If the thickness of the pads is close to the lowest permitted
limit or if they are damaged, have them replaced immediately.
• It is absolutely necessary to replace the worn discs and
pads as soon as possible. This operation must be performed
by an Authorised RIEJU Service Centre using only original
RIEJU spare parts.
A
Fig. 36
1
2
3
MIN 2 mm
B
4
5
6
41