Digital Instrument Board - RIEJU CITY LINE 125 User Manual

3.12 DIGITAL INSTRUMENT BOARD

The digital instrument board features functions that are useful for
a proper use of the vehicle.
When the ignition key is turned to
instrument board for about 2 seconds to automatically test opera-
tion; for the same reason, the back-lighting will come on and all
warnings lights and indicators (speedometer, fuel and water tem-
perature) will first gain their full scale position and then regain the
current setting.
The selected capacity and software version will appear for about 2
seconds. Lastly the "OIL" message will appear (steadily lit) along
with "Bar" (blinking) for 8 seconds to test operation of the engine
oil pressure check.
If the message does not appear, before starting the
vehicle check the oil level and have the vehicle checked
by an Authorised RIEJU Service Centre as soon as you
can.
The automatic check is performed every time the ignition key is
turned to . If the check is performed only partially or not
performed at all, have the vehicle checked by an Authorised
RIEJU Service Centre.
When this signal disappears, the following appear:
1) Secondary Menu or Sub-menu (see § 3.12.1)
2) Main Menu (see § 3.12.1)
3) Bar graph showing battery charge level and relative symbol
(see § 3.12.3)
english
, all displays will appear on the
5
2
3
4) Bar graph showing the actual speed and relative unit of meas-
urement (see § 3.12.2)
5) Current time (for adjustment, see § 3.12.2)
To select a function, press the MODE button on the right hand
control (4 - Fig. 18). Operation of the MODE button is illustrated in
the following charts (Fig. 16a/b/c), with the arrow icon and the
relative time the button must be held down. If there is no button
pressing indication, a short pressure is sufficient (about 1 second).
Available functions are divided into Main Menu and Secondary
Menu or Sub-menu (§ 3.12.2).
The digital display can show warning and alarm signals (§ 3.12.3),
which inform the driver when it is time to have the vehicle checked
or when to replace the engine oil; alarm signals are illustrated
and described here below.
If there are several alarms, the relative signals will appear alter-
nately for a few seconds until the problems have been solved.
4
1
1
2
3
4
5
6
15