Motion Detection - Genie DNR2700Z Instruction Manual

¡á Operating Your Camera

Motion Detection

This product has a feature that allows you to observe movements of objects
in 8 different areas on the screen, and the words 'MOTION DETECTED'
appear on the screen when movement is detected; hence a single individual
can conduct supervision efficiently. The camera detects an object's movement
by sensing disparity of outline, and level of brightness and colour.
MD SETUP
AREA SEL AREA1
AREA MODE ON
SENSITIVITY LOW
SMART ZOOM ON
END
¤ýPlease press the SETUP button.
- OFF: MOTION DETECTION mode is cancelled.
- ON: Any motion in the selected areas is observed.
¡Ü AREA SEL : You can select the area you wish to observe from the 8 area.
¡Ü AREA MODE : Determines whether to use the MD area selected in SENSITIVITY
¡Ü SENSITIVITY : You can select up to 8 MD areas. When SENSITIVITY
number is high, motion detection sensitivity is increased
to recognize even small movement
AREA SEL
AREA MODE
SENSITIVITY
SMART ZOOM
END
¡Ü SMART ZOOM : Smart zoom is operated in connection with
MOTION DETECTION. When the SMART ZOOM
function is 'ON' while the MOTION DETECTION mode
is 'ON', the zoom goes to the TARGET ZOOM position
once motion is detected. Once the zoom action is
finished and 'DWELL TIME' has passed, the zoom
returns to the 'START ZOOM' position.
High Sensitivity Day&Night Power Zoom Camera
AREA SETUP
TOP 3
6
BOTTOM
3
LEFT
6
RIGHT
END
MD SETUP
AREA1
ON
LOW
ON
22
¤ýSTART ZOOM : Use the left or right button in the 'START ZOOM' item
to select the zoom position from 1x to 27x / 33x / 37x to be returned
after the 'SMART ZOOM' action is over.
¤ýTARGET ZOOM : Use the left or right button in the 'TARGET ZOOM'
item to select the zoom position from 1x to 27x / 33x / 37x to be
used during MOTION DETECTION.
¤ýDWELL TIME : Use the left or right button in the 'DWELL TIME' item
to select a time between 5 and 60 seconds for the dwell time before
the zoom is returned to the 'START ZOOM' position.
(5,7,10,15,20,30,40,60 sec)
¡Ü TOP, BOTTOM, LEFT,RIGHT : You can adjust the size of the area
Note
Tips on Using the Motion Detection Feature
• The feature may not function properly under flickering light conditions.
• The camera interprets sudden changes in lighting and subsequent
change in brightness of an object as motion.
• With the feature enabled, other algorithms may require additional time
to operate than usual.
Note
• This system does not guarantee prevention of fire or theft. The manufacturer
shall not be held responsible for any accident or damage incurred.
FOCUS
MAIN SETUP
WHITE BAL
BACKLIGHT
MOTION DET
FOCUS
EXPOSURE
SPECIAL
RESET
EXIT
23
High Sensitivity Day&Night Power Zoom Camera
ATW
OFF
OFF