Epson TM-C7500 Series Technical Reference Manual page 84

Layout settings
Item
Media layout name
Defined media layout
Media form
Layout Information (mm)
Borderless printing
Feather edges
When printing on long labels, depending on the media, the print result may not reach the specified
length. As a result, provided the paper feed direction is up, the bottom edge of the label may be
blank. If this blank bothers you, try the method below.
Step 1: Check the print result.
Step 2: Add the blank section to the specified label length in the layout setting menu.
84
Sets the media layout name.
Enter a name.
The defined media layout in the list is displayed.
Sets the media form.
Sets the media width, label width, left gap, label length and blackmark
interval.
Layout information that can be set changes depending on the media
form. Before setting the layout information, set the media form.
When checked, the printing range can be expanded.
When the margins are zero, the print may extend outside of the media/
label. Use it accordingly.
When [Feather edges] is checked, gradation processing is performed
on the margin areas. It can be set only when [Borderless printing] is
checked.
Description