Table of Contents
Advertisement
IP Power Manager XL-IPM401 User's Guide
2.5.2.1 IP address Settings: Ethernet (LAN ) and Internet(WAN)
Local Area Network (LAN) :
In LAN, you can set a fixed IP address or gain it from a DHCP server automatically. We suggest to use a
fixed IP address in order to let the other computers can visit the XL-IPM401.
Now type the new IP address in the address field of IE, you can visit the XL-IPM401. You also can use the
ipedit.exe to find the XL-IPM401 and modify its IP address.
Work on Internet (WAN) :
User can set the IP provided by your ISP. If the XL-IPM401 has a public IP address, you can control it
through the Internet. IP Sensor XL-IPM401 supports fixed IP, DHCP.
IP Address: please type in the IP address provided by your ISP. If XL-IPM401 is working with a
Router, please refer to the network settings of the Router.
Subnet Mask : please type in the Subnet Mask provided by your ISP. If XL-IPM401 is working with
a Router, please refer to the network settings of the Router.
Default gateway: please type in the Default Gateway provided by your ISP. When XL-IPM401 is
working with a Router, please refer to the network settings of the Router.
DNS Server : please fill in the IP address of DNS server.
DHCP Clients: Enable– activate DHCP service. DHCP will assign IP address for each PC.
o Disable – shut down the DHCP service. You can set the IP address by yourself.
Beeper : Enable – activate the beeper . Disable – turn off the beeper. If you control the XL-IPM401
through the web page, the beeper will beep once when the operation work.
Http Command Verification: setup the control possibility from HTTP command or SDK (VB &
VC):
Select " Cookie +Base64 " : enable Http command & SDK control
Select " Cookie " : enable Http command & SDK control
11
www.xtendlan.com
Advertisement
Table of Contents
