25XX-100, -110
Covers, bottom removal
1. Remove the top cover. Go to
page
4-8.
2. Remove the logic board. Go to
page
4-12.
3. Remove the power supply unit. Go to
on page
4. Remove the print unit. Go to
page
4-29.
Electronics removals
EPROM removal
1. Remove the options cover (A) by pulling it outward and then up
and out of the printer.
2. Remove the EPROM module.
Note: When replacing the EPROM module, be sure the notch on
the module is toward the front of the printer.
4-16.
"Covers, top removal" on
"Logic board removal" on
"Power supply removal"
"Print unit removal" on
Repair information
4-11