Table of Contents
Advertisement
25XX-100, -110
Configuration page
This page displays numerous links that enable users to access and
(with proper permissions) to change various device settings.
Changing a configuration setting:
1. From the Configuration page, click the appropriate link to
access the desired device setting.
2. Make the desired changes to the selected setting.
3. To save the changes as the new device faults, click Submit. Or,
to cancel any changes and restore all fields on the form to their
original values, click Reset.
Note: Changes to network settings of the device should only be
performed by the network administrator.
Reports page
The Reports page contains the following links:
•
Print server setup
The Print Server Setup page lists important print server
information (for example, hardware addresses, firmware
revision level, protocol settings, and so on.)
•
Network setup
Network protocol settings are displayed. Adjustments can also
be made to settings here.
•
Device information
General device information is displayed here.
3-8
Service Manual
Advertisement
Table of Contents
