25XX-100, -110
Paper Select sensor
Action
Turn the power off.
Install the Push
Tractor.
Set the Paper Select
lever to the tractor
position, and load
continuous forms.
Turn the power on.
Remove the
continuous forms.
Set the Paper Select
lever to the cut sheet
position, and insert a
cut sheet.
2-14
Service Manual
Check
The Load/Unload button functions correctly.
Go to
"Paper Select sensor service check" on
page
2-28.
When Auto Ready Cut Sheet is enabled, paper
feeds automatically.
When Auto Ready Cut Sheet is disabled, press
FormFeed to load a cut sheet.
Verify that the Load/Unload button does not
function.
Go to
"Paper Select sensor service check" on
page
2-28.