Telecom T4010 Getting Started page 5

Installing and removing the microSD card
To release the microSD card holder, slide it in
the direction of the arrow and lift it. Then insert
the microSD card with the golden contact
downward. Finally, turn down the microSD
holder and slide it in the opposite direction to
lock it.
Charging the battery
Connect the battery charger to your phone and
outlet respectively.
To reduce power consumption and
energy waste, when battery is fully
charged, disconnect your charger
from the plug; switch off Wi-Fi, GPS,
Bluetooth or applications running in the
background when not in use; reduce the
backlight time, etc.
6
IP4464_Telecom T4010_QG_Eng_USA_for NZ_05_130322.indd 6-7 IP4464_Telecom T4010_QG_Eng_USA_for NZ_05_130322.indd 6-7
1.2.2 Power on your phone
Hold down the Power key until the phone
powers on. It will take a few seconds before the
screen lights up.
Set up your phone for the first time
The first time you power on the phone, you are
prompted to set up your phone in multiple ways:
language, input method, mobile data connection,
account setup and synchronization, system
update, etc. You are required to sign into your
Google account to synchronize email, contacts,
calendar and other Google applications
• Enter your user name and password, then
touch Sign in. If you forget your password, you
can go to http://www.google.com/ to retrieve
it. If you don't own a Google Account, you are
prompted to create one by touching Create.
• Read the setup information on the screen.
• Mark/Unmark the check box to choose
whether you want to take advantage of
Google's location service, then touch Next.
• Mark/Unmark the check box to choose
whether you want to back up data with your
Google account, then touch Next.
• Touch Finish setup.
(1)
Application availability depends on country and operator.
(1) .
7
2013-3-22 15:48:11 2013-3-22 15:48:11