Mercury 80 Owner's Manual page 51

1. Shift outboard to neutral (N) position.
2. Straighten the bent tabs on the propeller nut retainer.
3. Place a block of wood between gearcase and propeller to hold propeller and remove propeller nut.
4. Pull propeller straight off shaft.
5. Coat the propeller shaft with Quicksilver or Mercury Precision Lubricants Anti-Corrosion Grease or 2-4-
C with Teflon.
Tube Ref No.
Anti-Corrosion Grease
94
2-4-C Marine Lubricant
95
with Teflon
MAINTENANCE
N
Description
45
ob00351
ob00376
ob00377
ob00378
Where Used
Propeller shaft
Propeller shaft
Part No.
92-802867Q1
92-802859Q1