Preparation For Transmission; Switching To The Fax Mode - Toshiba E-STUDIO 3511 Operator's Manual

2. PREPARATION FOR TRANSMISSION

Switching to the Fax Mode

1
Press the [FAX] button on the control
panel to select the Fax function.
2
- Be sure to switch over to the Fax mode before carrying out Fax
operations.
- If you leave the digital copier for about 45 seconds, it
automatically returns to the copy mode.
- You can also switch to the Fax mode when the digital copier is in
the energy-saving mode.
When Controlling the Use of the Copier with Department Codes
With the use of department codes (access codes), you can restrict Fax users as well as manage output
volumes by individual groups or departments within your company.
- To register, change and cancel a department code, see the [User Functions Guide].
1
If "Enter Department Code" appears, key
in the registered department code (5
digits), and press the [ENTER] button.
If the department control function is in use, be sure to press the
[ACCESS] button on the control panel after finishing the Fax
operation. The menu returns to the department code input screen
and the output control will be enabled.
26
2.SENDING A FAX