Installation; Accessories; Antenna Connection - Haier LED46T3 Service Manual

Installation

External Equipment Connections

Accessories

Remote control

Antenna Connection

Over-the-air TV reception quality will depend on your antenna type, antenna location and antenna positioning.
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
Wall Antenna
Socket
VHF Antenna
UHF Antenna
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
Outdoor Antenna
Owner's manual
Bronze Wire
RF Coaxial Wire (75 ohm)
Turn clockwise to tighten
Alkaline battery (AAA) x 2
Bronze Wire
Be careful not to bend the bronze wire
when connecting the antenna.
To improve the picture quality in a poor signal
area, please purchase a signal amplifier and install
properly.
If the antenna needs to be split for two TV's, install a
"2-Way Signal Splitter" in the connections.
To install the antenna properly please contact a
professional in your area.
Note
All cables shown are not included with the TV.
Installation
Haier LED HDTV EN-8