Troubleshooting - Vermont Castings AVFL42NTSC Installation & Operating Instructions Manual

TOUCH SCREEN REMOTE CONTROL OPERATION
Symptom
1. Battery icon on LCD on transmitter
2. LCD display is blank
3. LCD display shows "funny" display
4. Appliance does not come on
5. Blower is not on after the fi replace is
turned on
20305467

TROUBLESHOOTING

Causes
1. Low Battery
2. The transmitter did not match
with the receiver
3. Transmitter measures temp-
erature exceeding 99 degrees
Fahrenheit and shows "HI" on
LCD
4. Distance between the transmitter
and receiver is more than 30 feet
5. Blower setting is off
6. Blower delay setting is set too
high
AVFL Vent Free Fireplace
Action
1. Replace batteries. Change batteries
every 6 months.
2. Check battery installation or replace
batteries.
3. Reset the transmitter (see "Resetting
the Transmitter" section).
1. Make sure the transmitter has
learned to the receiver.
1. Move transmitter to a cooler place
and wait until temperature drops
below 99 degrees.
1. Make sure the opening distance is
less than 30 feet.
1. Press FAN key to select Fan speed
you desire.
1. Press and hold FAN key to set
desired ON/OFF delays. This is done
in minutes.
27