KitchenAid KERS507 Use And Care Manual page 27

Using auto set
Auto Set lets you choose from among ten
preset oven cooking cycles. These cycles
store commonly used cooking times,
cooking temperatures, and probe tempera-
1. Place food in cold oven.
If you need the Temperature Probe for
your cycle (settings 5-8), insert probe
into food. (Follow Steps 1-4 in "Using
the temperature probe" on page 24.)
2. Set Auto Set cycle.
Press desired Number pad.
(Use the "Auto set chart" on page 28
as your guide for selecting the correct
cycle.)
NOTES:
• You can change the Auto Set
cycle any time before pressing the
Start/Enter pad by repeating Step 2.
3. Start oven.
PRESS
NOTE: Cycles 1-4, 9, 0: To see the time
when the Auto Set cycle will end, press
the Stop Time pad. Cycles 5-8: To see
the internal food temperature selected,
press the Temp Probe pad.
When the Auto Set cycle is done,
"End" and the time of day will show
in the display. Four tones will sound,
followed by one short tone every
minute, until you open the door, remove
the probe, or press the Cancel/Off pad.
U
PRESS
AUTO
SET
Example:
PRESS
1
START
ENTER
sing and Caring for
ture settings. Auto Set saves you time by
limiting the number of pads you have to
press when cooking at a favorite setting.
YOU SEE
Example:
YOU SEE
• The cooking setting, time, or probe
temperature will be displayed before you
press the Start/Enter pad.
Example
For Auto
Set 5:
YOU SEE
Example:
YOU SEE
Y O
our ven
DELAY TIMED
ON
CLEAN LOCKED
HR
DEHYD ROTIS
START? CLEAN
DELAY TIMED
ON
CLEAN LOCKED
HR
DEHYD ROTIS
START? CLEAN
DELAY TIMED
ON
CLEAN LOCKED
HR
DEHYD ROTIS
START? CLEAN
DELAY TIMED
ON
CLEAN LOCKED
HR
DEHYD ROTIS
START? CLEAN
MIN MIN SEC
START STOP TIMER
MIN MIN SEC
START STOP TIMER
MIN MIN SEC
START STOP TIMER
MIN MIN SEC
START STOP TIMER
27