Polaris ATV 2001 Owner's Manual page 175

Cleaning Your ATV
Keeping your ATV clean will not only improve its appearance but
it can also extend the life of various components. With a few pre-
cautions, your ATV can be cleaned much like an automobile.
Washing
If a high pressure type car wash system is used, extreme care must
be taken to avoid water damage to the wheel bearings, transmis-
sion seals, body panels, brakes and warning labels. Many expen-
sive repair bills can result from using high pressure detergent sys-
tems.
NOTE: If a high pressure car wash is used, grease all zerk fittings
immediately after washing. Also run the vehicle to evaporate any
water that might have entered the engine or exhaust system.
The best and safest way to clean your ATV is with a garden hose
and a pail of mild soap and water. Use a professional type washing
mitten, cleaning the upper body first and the lower parts last. Rinse
with water frequently and dry with a chamois to prevent water
spots. NOTE: If warning labels are damaged, contact your a Po-
laris dealer for free replacement.
Waxing
Your ATV can be waxed with any non-abrasive automotive paste
wax. Avoid the use of harsh cleaners since they can scratch the
body finish.
Certain products, including insect repellants and chemicals,
will damage plastic surfaces. Care must be taken when
using these products near plastic surfaces.
MAINTENANCE
164