Polaris ATV 2001 Owner's Manual page 139

Choke Adjustment Procedure 4-cycle Engine
Toggle Switch
1. Push choke knob to the full
off position.
2. Slide boot off in-line cable
adjuster sleeve.
adjustment locknut on in-
line cable adjuster.
3. Turn cable sleeve adjusting
nut clockwise on in-line ad-
juster until 1/8" (.3 cm) or
more choke toggle free
play is evident.
4. Turn the cable sleeve adjusting nut counterclockwise on the in-
line cable adjuster until the toggle has zero free play. Then ro-
tate it clockwise until 1/8" to 1/4" (.3 to .6 cm) toggle free play
is evident.
5. Tighten adjustment locknut.
6. Slide boots back over cable adjuster sleeve until they touch at
the middle point of the sleeve.
Loosen
MAINTENANCE
s
128