Electronic Temperature Controls - Electrolux Side by Side Refrigerator Use & Care Manual

ALLOWING COOLING TIME BEFORE USE
To ensure safe food storage, allow your refrigerator to operate with the doors closed for at least 8 to 12 hours before placing food inside. During
this cooling period, you do not need to adjust the controls, which are preset at the factory.
SETTING COOLING TEMPERATURES
Your refrigerator comes with a state-of-the-art electronic digital control system. The system's control panel is located at the top of the the fresh
food compartment.
The two digital displays on the left half of the control panel indicate the current settings or temperatures of your freezer and fresh food
compartments. The models with a 2-digit temperature display are for reference only, and do not display the current accurate compartment
temperature. Should you desire to see what the current accurate temperature is, place a separate thermometer inside the freezer or fresh
food compartment in the desired location.
(Temperature Display - Features may vary .)
(Single Digit Display - Features may vary.)
NOTE NO NO NO NO TE TE TE TE
The advanced electronic control system in your refrigerator includes additional display modes that service professionals can
use to rapidly diagnose performance issues.
To adjust the temperature to a higher or lower setting, press the
Up (Cold) or Down (Colder) button closest to the display. The
first time you press the button, the display shows current
setting you entered. Each press of the button after that
changes the setting by one.
The display shows your new setting momentarily, then changes
back to the current temperature.

ELECTRONIC TEMPERATURE CONTROLS

8
CHOOSING FAHRENHEIT OR CENTIGRADE
Depending on which temperature standard you prefer to use,
you can set your control panel to display in fahrenheit or
centigrade. To change between fahrenheit and centigrade,
press the Mode button (located between the two digital
temperature displays).
Press to alternate between
Fahrenheit and Centigrade