Setting Current Track As A Ring Tone - SoftBank X3HT User Manual

Playback Menu
Press Menu to use the following functions:
Item
Add to Playlist Add current track to a playlist
Playback Mode Set continuous or random playback
Time Display Toggle Elapsed and Remaining time
Adjust audio quality when Headphone Cable (with
Audio Booster
Microphone) is connected (P.12-13)
Properties View current track information
Set as Ring Tone Set current track as a ring tone (P.12-4)
Exit End Audio Manager
About Audio Manager version information

Setting Current Track as a Ring Tone

1.
During playback,
The Set as Ring Tone window appears.
2.
Select a setting method
Set as Default Ring Tone: Use as ring tone immediately.
Save to Ring Tone Folder: Save to use as ring tone later
3.
OK Select key
12-4
Description
Menu Set as Ring Tone
Setting Part of a Track as a Ring Tone
Clip and copy a portion of the current track to set as a ring tone.
Only MP3 files can be trimmed.
1.
During playback,
2.
Trim
3.
Set the start position
Start
Use Up/Down Navigation key to select
Navigation key to move marker to start position.
Select Play to play from start to end positions;
playback.
4.
Set the end position
Perform the same steps as to set start position.
Menu Set as Ring Tone
End
Mark in and Left/Right
Stop to stop