Nacra FCS Owner's Manual page 12

3.3. D a g g e r b o a r d E x t e n s io n
T r i m
1. Tie the harken 18mm
single block to the trampo-
line rod in between the 4
th
and 5
either side, as illustrated in
the overview.
2. Tie the 2.3 meter
shockcord to 29mm T2
1
single block and on this
block the 0.35 meter
shockcord, of which the
other end is tied to the the
second 29mm single block.
2
3
th
tramp button on
4. Lead the DBD extension lines through the trampoline
thought the blocks and back through the trampoline as illus-
trated in the overview. (red and green)
5. Lead the 3mm dyneema pull up Haylard through the
Harken Lead Ring on the shrouds. Tie the double T2 29mm
block on the halyard, the dog-bone splicing end will be
attached to the daggerboard as illustrated on page 9.
3. Lead the shockcord
through the 18mm soft sin-
gle block diagonal to the
forward corner of the tram-
poline and tie the shockcord
to the most forward trampo-
line webbing.
4
5
12