Table of Contents
Advertisement
16
Putting into operation
10.
Connect water hose to water inlet.
The cleaner may be connected to a water
mains (1-8 bar pre-pressure) with either
cold or up to 60°C warm water.
11.
Connect to circuit.
Kränzle 122 Silent:
230 V ~, 7.5 A, 50 Hz
The socket must be protected with a 16A
delay action fuse on the mains side.
12.
Steplessly adjust operating pressure
with handwheel. The maximum pressure
is adjusted ex work.
13.
Switch on high-pressure cleaner
with opened spray gun. Bleed appliance:
Gun has to be opened and closed several
times. Start cleaning task.
Advertisement
Table of Contents
