Setting Your Logo - Panasonic KX-FT907BX-B Service Manual

KX-FT907BX-B / KX-FT907BX-W
3.3.5.

SETTING YOUR LOGO

The logo can be your company, division or name.
1 Press [MENU].
2 Press [SET].
3 Press [ ] or [ ] repeatedly to display the following.
4 Press [SET].
· The underbar shows a position of the cursor.
5 Enter your logo, up to 30 characters. See the character table on
page 15 for details.
6 Press [SET].
· The next feature will be displayed.
6 Press [MENU] to exit the program.
Note:
· Your logo will be printed on each page transmitted from
your unit.
To enter your logo
Example: "BI LL"
1. Press [2] 2 times.
2. Press [4] 3 times.
3. Press [5] 3 times.
4. Press [ ] to move the cursor to the next space and press
[5] 3 times.
To correct a mistake
Press [ ] or [ ] to move the cursor to the incorrect character,
and make the correction.
To delete a character
Press [ ] or [ ] to move the cursor to the character you want
to delete and press [STOP].
To insert a character
1. Press [ ] or [ ] to move the cursor to the position to the
right of where you want to insert the character.
2. Press [MUTE] to insert a space and enter the character.
16