Recording Paper - Panasonic KX-FT907BX-B Service Manual

KX-FT907BX-B / KX-FT907BX-W
3.3.3.

RECORDING PAPER

1 Open the cover by pressing the cover open button (
2 Install the recording paper.
3 Insert the leading edge of the paper into the opening above the
thermal head ( ).
4 Pull the paper out of the unit.
· Make sure that there is no slack in the paper roll.
). 5 Close the cover securely by pushing down on.
6 Press [FAX/START] to cut the paper.
Note:
· If the paper is secured with glue or tape, cut approximately
15 cm from the beginning of the roll before installing it.
· When the power cord is connected, a message is printed
each time the cover is opened then closed. If the recording
paper is installed upside down, the massage will not be
printed. Install the paper correctly.
14