Hardware Installation - Dedicated Micros Pick-a-Point Installation Manual

Hardware Installation

The workstation can be kept remote to the Pick-a-Point keyboard.
The Pick-a-Point workstation will require;
• 3 power outlets
• RJ45 connection to Cat5 network
To install the hardware;
1) Connect the qwerty keyboard
2) Connect the Pick-a-Point keyboard
3) Connect the monitor
4) Connect the USB mouse. Do not connect any other USB devices.
5) Finally, connect the power
Note: Do not plug in the network at this time. Initial installation and configuration will be quicker offline. The
network can be installed once the basic setup is complete.
9