Dedicated Micros Pick-a-Point Installation Manual page 18

Adding External Devices
Use the drop down menu to select which external device will be configured, then assign a drive letter.
To add an External Device;
1) Click on 'File -> System Setup' on the main menu bar.
2) Select the 'External Devices' tab.
3) Use the drop down menu to selec which device will be configured.
4) Assign a drive letter using the drop down menu.
5) Click 'Save' to assign the chosen drive letter to the chosen drive.
This menu is available via the Supervisor login and can be configured or edited at a later date if required.
18