FS-8700-48 Fike Cheetah Manual
3.4
Connecting the FieldServer to the MIM (Multi -Interface Module)
The RS-232 port of the FieldServer connects to the P5 (RJ11) RS-232 port of the MIM board.
3.4.1 Connection Notes
The Peripherals menu of the Fike Panel needs to be updated:
Hit 'ESC' until "Top Level Menu" is on the screen
Hit 'F1' for "Config"
Hit 'F6' for "Menu 2"
Hit 'F6' for "Menu 3"
Hit 'F1' for "Periph"
Hit 'F1' for "Device"
Choose address of MIM
Set "Type" to "Computer"
Set "Supervise" to "No"
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com
Page 9 of 36