Table of Contents
Advertisement
FS-8700-48 Fike Cheetah Manual
1
CHEETAH DEVICE DESCRIPTION
The Cheetah Protocol driver allows the FieldServer to transfer data to and from devices over either RS-232 or RS-
485 using the Cheetah device protocols (Legacy Cheetah Classic and the current Cheetah Xi).
The driver supports messages sent from the Cybercat panel. Specifically, the driver supports message 1.02 which
reports panel, zone and device states.
The FieldServer can emulate either a Server or Client but it should be noted that it can only process unsolicited
messages from the Cheetah devices. Thus, it does not provide an active Client driver. It is best to consider this
driver as a consumer only driver with the data being produced by a Cheetah controller.
2
DRIVER SCOPE OF SUPPLY
2.1
Supplied by FieldServer Technologies for this driver
FieldServer Technologies PART #
21723-1
FS-8915-10
FS-8917-04
FS-8917-14
2.2
Provided by Supplier of 3
Part #
Description
Fike Cheetah panel and power supply.
RS-485 cable, if required.
Longer UTP cable, if required.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com
Description
Flat 6 way cable (7 foot) for RJ11 connection
UTP cable (7 foot) for RS-232 use
RJ45 to DB25F connector adapter
RJ11 to DB25M connection adapter
rd
Party Equipment
Page 5 of 36
Advertisement
Table of Contents
