Time - D-Link DIR-505 User Manual

Section 5 - Repeater Mode
The Time page allows you to configure, update, and maintain the correct time on the internal system clock. From this section
you can set the time zone that you are in. Daylight Saving can also be configured to automatically adjust the time when needed.
After making your changes, click the Save.Settings button.
Time Zone: Select the Time Zone from the drop-down menu.
To select Daylight Saving time manually, click the Enable.
Enable
Daylight Daylight.Saving check box. Next use the drop-down menu
to select a Daylight.Saving.Offset.and then enter a start
Saving:
date and an end date for daylight saving time.
Enable NTP NTP is short for Network Time Protocol. NTP synchronizes
Server: computer clock times in a network of computers. Check this
box to use a NTP server. This will only connect to a server on
the Internet, not a local server.
NTP Server
Enter the NTP server or select one from the drop-down
Used:
menu.
Date and
To manually input the time, enter the values in these fields

Time:

for the Year, Month, Day, Hour, Minute, and Second and
then click Save.Settings. You can also click the.Copy.Your.
Computer's.Time. Settings button at the bottom of the
screen.
D-Link DIR-505 User Manual
Time
110