Extend Wi-Fi Setup - D-Link DIR-505 User Manual

Section 5 - Repeater Mode
Use this section to manually configure the wireless settings for your DIR-505's wireless extended network that connect your
devices to. After making your changes, click the Save.Settings button.
Wi-Fi Network This shows the name of the Wi-Fi network that the DIR-505
Name: is extending.
Extended Wi-Fi You can choose whether to use the same Wi-Fi network name
Network Name as the one the DIR-505 is extending, or to create a new one.
(SSID): If you create a new one, enter the name for your extended
Wi-Fi network.
Select the appropriate channel width between 20MHz or
Channel
Width: Auto.20/40MHz from the drop-down menu.
Visibility This setting controls whether the router's wireless network
Status: name(SSID) will be broadcast so that wireless devices can
scan for it. If you set it to Invisible, all wireless clients will
need to enter the network name and security settings of
your wireless network manually.
Security Mode: Select None, WEP, or WPA-Personal; the relevant settings
for the security mode you choose will appear. For security
purposes, it is highly recommended that you set this to
WPA-Personal. For more details, refer to the previous page.
Wi-Fi
Wi-Fi Protected Setup, or WCN, allows you to configure the
Protected basic settings of the DIR-505 through Windows. To enable
Setup: this feature, check the Enable checkbox.
D-Link DIR-505 User Manual

Extend Wi-Fi Setup

102