Advanced → Wireless Extender - TP-Link NC200 User Manual

wireless network.
5. Click Connect and a screen will pop up. Click Change on the pop-up screen.
6. Click OK on the pop–up screen to finish wireless connection procedure.
7. To start using camera wirelessly, unplug its Ethernet cable.
3.4.4 Advanced → Wireless Extender
On this page, you can setup and configure the wireless network extending feature of your camera.
Wireless extender function allows your camera to extend the range of your existing wireless
network. The same network name and settings as the existing wireless network can be used, or
you can create a new one.
The camera's wireless extender function is disabled by default. If you want to use this function, just
select the Enable option.
Host Wireless Network Name: Displays the name of the wireless network which your

camera is connected to. It is read-only.
Extended Wireless Network Name: Name of the wireless network that your camera will

extend.
Same as Host: The extended network will use the same name and settings as your Host

network. Your devices can use the same wireless information to connect to both the host
and extended networks.
Create a New One: Select this to manually set the name and security used for the

extended network. You devices can use the wireless parameters you set to connect to the
extended network.
NC200 Cloud Camera, 300Mbps Wi-Fi
24