Advanced → Cloud Settings; Advanced → Ddns - TP-Link NC200 User Manual

Max Clients: Set the maximum number of clients that are allowed to connect to the extended

network.
Click Save to save and enable the settings.
3.4.5 Advanced → Cloud Settings
Refer to 3.3.4 Basic → Cloud
3.4.6 Advanced → DDNS
If your camera is connected to xDSL modem or cable modem directly, you might need this feature
on the camera to allow you and your friends have access to the camera using domain name, in no
need of remembering the IP address. However, if your camera is behind a NAT router, you need to
set DDNS on your router, in no need of setting this on the camera. As to xDSL environment, most
users will use dynamic IP addresses. If users want to set up a web or a FTP server, then the
DDNS (Dynamic Domain Name Server) is necessary.
Service Provider: Select one of the built-in DDNS servers from the drop-down list: No-IP

Settings.
25
NC200 Cloud Camera, 300Mbps Wi-Fi