Advanced → Wireless Connection - TP-Link NC200 User Manual

Bonjour
Bonjour, also known as zero-configuration networking, enables automatic discovery of computers,
devices, and services on IP networks. Bonjour uses industry standard IP protocols to allow
devices to automatically discover each other without the need to enter IP addresses or configure
DNS servers.
Bonjour: To enable or disable the Bonjour service here.

Bonjour Name: Displays the Bonjour name. By default, it is a combination of model and the

last six characters of the camera's MAC address.
Click Save to save and enable the settings.
3.4.3 Advanced → Wireless Connection
The camera's wireless function is enabled by default. With this function enabled, you can connect
your camera to a wireless network wirelessly. If you don't want to use this function, just select the
Disable option.
On this page, you can either scan a wireless network to connect to or enter a wireless network's
parameters manually. To scan a wireless network, refer to
enter the parameters manually, see the following.
NC200 Cloud Camera, 300Mbps Wi-Fi
3.3.3 Basic → Wireless
22
Connection. To