Table of Contents
Advertisement
7、Names and functions of remote control buttons
Notes: This remote control is universal .It could be used for many units. Some buttons which are not
available in this unit will not be described below.
1. "ON/OFF" button
After powering the unit, when the unit is off state, press the "ON/OFF" button to start the unit. AND
when the unit is on state, press the button ,it will be off.
2. "Mode" button
Press this button , the unit will be run in the mode which you want. Press this button once, the mode
will be changed in a regular as AUTO –COOL –DRY –FAN – HEAT.
COOL；
；
AUTO
3、
+" 、
–
button
"
"
"
Press the "+" or "–" button to set your desired temperature. The temperature range is from 16℃ to
30℃.It is not necessary at AUTO mode. AND when you are setting the timing hours, press the "+" or "–"
button once, the timing hours will increase or decrease 0.5 hour.
" button*
4、"FAN
Press the "FAN" button to set fan speed. The AUTO FAN 、LOW、MID、HIGH could be selected.
(Indoor unit can only run at high fan speed mode and fan speed can't be modified by wired controller.)
DRY；
FAN；
24
HEAT
Advertisement
Table of Contents
