Receiving A Bluetooth Beam; Using A Bluetooth Phone As A Modem - QTek 2020 User Manual

Receiving a Bluetooth Beam

Make sure that your device is configured to
1
receive incoming beams and that
in discoverable mode.
Make sure that your device is within 10 meters
2
of the device beaming the information.
3 When prompted to receive an incoming beam,
tap Yes.
The information is now stored on your device.
Using a Bluetooth Phone as a
Modem
You can use a phone that has Bluetooth capabilities as a mo-
dem for your device. To do this, you create a Bluetooth modem
connection on your device and then send information to the
phone by using Bluetooth. The phone relays the information
over the phone line and then sends back to your device any
information that you had requested over the connection.
Once you create a modem connection to the Bluetooth phone,
you can reuse it whenever you want to use the phone as a
modem.
Make sure that the Bluetooth phone is turned
1
on, that your device's and the phone's Bluetooth
radios are turned on, and that your device and
the phone are within 10 meters (10 meters) of
one another.
If you have not already done so, create a
2
Bluetooth phone connection by following steps
3 through 16. Otherwise, skip to step 17.
Tap →
3
Tap Connections
4
connection.
Enter a name for the connection.
5
Select a modem
In the
6
Next.
Settings → Connections
→ Add a new modem
Bluetooth
list, tap
Pocket PC Phone User Manual
Bluetooth is
tab.
→
107