Wep Details Screen - Canon iB4000 series Online Manual

WEP Details Screen

Note
• This screen is not available depending on the printer you are using.
Specify the printer WEP settings.
Note
• When changing the password (WEP key) of the printer, the same change must be made to the
password (WEP key) of the access point.
1. WEP Key:
Enter the same key as the one set to the access point.
The number of characters and character type that can be entered differ depending on the combination of
the key length and key format.
Key Format ASCII
2. Key Length:
Select either 64bit or 128bit.
3. Key Format:
Select either ASCII or Hex.
4. Key ID:
Select the Key ID (index) set to the access point.
5. Authentication:
Select the authentication method to authenticate the printer's access to the access point.
Select Auto or Open System or Shared Key.
Downloaded from ManualsPrinter.com Manuals
Key Length
64bit
5 characters 13 characters
Hexadecimal (Hex) 10 digits
128bit
26 digits
248