Canon iB4000 series Online Manual page 478

1. Select Command Prompt as shown below.
• In Windows 8.1 or Windows 8, select Command Prompt from the Start screen. If Command
Prompt is not displayed on the Start screen, select the Search charm, then search for
"Command Prompt".
• In Windows 7, Windows Vista, or Windows XP, click Start > All Programs > Accessories >
Command Prompt.
2. Type the ping command and the IP address of the target printer or the target access
point, and then press the Enter key.
ping XXX.XXX.XXX.XXX
"XXX.XXX.XXX.XXX" is the IP address of the target device.
If the communication is available, a message such as the following is displayed.
Reply from XXX.XXX.XXX.XXX: bytes=32 time=10ms TTL=255
When Request timed out is displayed, the communication is not available.
Checking the Network Setting Information
To check the network setting information of the printer, print out the network setting information using the
operation panel of the printer.
Printing Out Network Setting Information
Downloaded from ManualsPrinter.com Manuals 478